Monday, March 27, 2017

Getting Organized

I've been crafting for my whole life, but I've gotten pretty serious about it in the last few years. That means I have tons of supplies. I try my best to buy them at reasonable prices, but it's of very little consequence if I end up not being able to find them or ruining my supplies because they are tossed in a random box or thrown in a pile. So I've been making an effort as of late to store my supplies better. 


Metal dies are a bit tricky to store. They need to be kept flat so they don't bend and they can be sharp or at the very least, a bit pokey. I had been storing them in a plastic shoe box with my embossing folders, but I was worried they'd get bent and it was hard to see what I had. So I bought an Art Bin Magnetic Storage Case. This box is fairly small--about 10 inches--but stores a ton of dies.


The box comes with 3 Magnetic Die Sheets and you can buy more to fill it. 3 sheets doesn't seem like much, but I was able to fit two complete sets of dies on one sheet. It's nice and compact and the dies are secure on the magnets.


The embossing folders in that same plastic shoe box needed a home of their own too. They aren't as tricky to store, but I found the Darice Embossing Folder Organizer which keeps them all neatly tucked away. Unlike the ArtBin Die box, this portfolio is rather large (bigger than a binder coming in at 17+ inches).


It has 4 pockets per page (double sided) and holds 40 embossing folders.


The pockets fit both 4 x 6 and 5 x7 folders. I took a picture of the larger Cuttlebug brand folders and a smaller freebie folder side by side. They both fit perfectly.


My last organizing challenge was moving my alcohol ink supplies out of a cardboard shoe box and into the Sterilite Stack and Carry Box. I picked mine up at Big Lots for a discounted price.



In the bottom layer, I was able to store all of my inks and my color guides with plenty of room for more inks and my applicators. The second layer stores my craft mats, water pen, plastic palette, air can, eye droppers, etc... The only thing I couldn't fit in the box was my rubbing alcohol bottle.

I'm excited to have my supplies so easily at hand. What storage and organization tips do you have for your craft supplies?

Monday, March 20, 2017

Tissue Paper and Mod Podge on Drink Mix Containers


I'm no stranger to decoupaging tissue paper onto plastic containers. It's an excellent way to cover surfaces that aren't perfectly straight and that need to remain semi-flexible and sealed once finished. So when I had managed to accumulate three of these lovely little containers for Target's version of Crystal Light, I knew exactly how to cover them. 


I grabbed my Mod Podge, a foam paintbrush, some coordinating tissue paper, and a scissors.


I used the container as a template for the tissue paper. Tissue paper is tough to cut straight, so if I'm using a scissors, I'll fold the paper to create a cut line. Another good way to cut tissue paper and keep it straight is with a rotary cutter and a ruler. I tend to cut it just a smidge bigger than I need, I'd rather have too much paper than not enough.


Then I spread a thin layer of mod podge onto the container with my foam brush. You don't need much, just enough to get a good seal between the container and the tissue paper. If you use too much, the paper will soak it up and become very fragile (and more likely to wrinkle or even tear).


Next, I gently smoothed the paper onto the glue. Be careful not to rub hard or use wet or sticky fingers with this step. If your fingers become sticky with glue, take a break and clean them so they don't stick to the fragile paper and tear holes in it. Solid colored paper tends to be a bit less sturdy than the stuff that has printed patterns on it, so be extra careful with the plain tissue paper. 

Since these containers have a bit of a flair at the top, I couldn't wrap the paper around the container straight and smooth, I ended up having to tuck the excess at the corners. I tried to keep the top edge straight and just fold the extra over as neatly as possible.


After I was done gluing the paper on, I tipped the containers up and glued any excess paper from the bottom edge down. I find that this looks neater and cleaner than trying to cut it the exact right length and worrying about it being straight on the top and bottom. I let them all set and dry for a bit while I put away the tissue paper and scissors and washed and dried my hands. Since I was making three of these containers, that was enough time for me to start sealing the first container I had worked on without the paper being too wet to work with. A good 5-10 minute rest is recommended to keep the paper from tearing. Letting it dry completely is also totally fine, but I'm terribly impatient.


On the sides that had folded over edges or corners from the irregular shape of the container, I made sure to glue under the folded edge before I put a layer of glue over top to seal it. I try to apply enough glue that it sinks into the tissue paper and creates a thin layer over top. Be careful not to apply it too thickly that it won't dry clear (big globs may not dry all the way or may take a really long time to dry enough to turn clear, so give it a quick check for drips before you leave it to dry).


As the containers dry, some of the wrinkles will smooth out, but unless you were super careful when applying the tissue paper, some of the wrinkles will stick around. It's part of the charm of decoupaging tissue paper.


I took this photo right after they were dry to the touch, so they were still a bit wrinkly, but even if they don't smooth out, they'll make great containers for my office supplies. They'd also work great for cosmetics like storing eyeliner and brow pencils, hair ties, sample packets, etc... What would you store in these containers?

Monday, March 13, 2017

Applying Alcohol Ink with Wax Paper


After last week's second experiment applying alcohol ink with plastic wrap, I was eager for more unusual application methods. I found a couple of white ceramic tiles and figured they were the perfect medium for trying something different, so I grabbed some wax paper. I figured the effect would be fairly similar to the plastic wrap.


I rolled out my craft mat and brought out my alcohol inks. I wiped off the ceramic tile with a paper towel wetted with some rubbing alcohol and let it dry.


To get the tile covered in ink, I started by squeezing some ink onto the tile.


Then placed the wax paper onto the tile and lifted it up. It created a wet mix of colors.


I layered some additional colors on and applied the paper repeatedly. I would place it on the tile, wipe my fingers over it and then lift it up. I would reposition the paper to move any ink that was still on the wax paper to a different part of the tile. As I continued to apply the paper, it started to dry out and soak into the wax paper (it even bled through the paper).


As it dried out, it created an interesting stamped texture. I really liked the texture, but I wasn't real happy about the colors all muting together, so I kept adding bolder colors to try to create more interest. I would sometimes apply ink to the wax paper and fold it over (like a Rorschach ink blot) before applying it to the tile.


On my second tile, I tried crumpling the paper with ink on it.


This application method created even more texture. I tried without much luck to try to apply color in in a controlled fashion to create patterns, etc.. but had very little luck. Random seemed the mode of the day.


If you didn't believe me about the ink soaking through the wax paper--here's the proof. So if getting ink on your hands is not your idea of a good time, you might want to wear gloves with this method. I usually don't get quite this much ink on hands. I was able to get most of it off with a paper towel soaked in rubbing alcohol. Hand sanitizer also helps. If you can get most of it off, the rest will fade in a day or two with normal hand washing.


I had some success adding contrast with some yellow and red ink and really enjoyed this new method.

Monday, March 6, 2017

Plastic Wrap and Alcohol Ink Candles


This fall I tried a new technique with alcohol ink that I had been wanting to try: plastic wrap. The first project I used this technique on was a decorative wine bottle from the dollar store. For that project, I struggled with the plastic wrap not being large enough to cover the whole bottle, so when I decided to do it again, I picked a project that I could easily wrap a piece of plastic all the way around. I also thought I'd be more adventurous with my color choices (last time I chose colors all in the same color family). So this time I chose to make some rainbow colored altar candles


I put down my craft mat and chose a selection of rainbow colored alcohol inks in bright shades. Then I scraped the labels off of the altar candles (and used some goo gone to remove any leftover stickiness). Then I tore off a sheet of plastic cling wrap and put it down on my craft mat.


I randomly dripped my colors onto the plastic wrap. I noticed that the green was mixing with some of the other inks (pink, red, and orange) to create brownish tones.


To make sure it covered the whole candle, I dripped some rubbing alcohol onto the inks to help it spread.


Then I set the onto the plastic wrap and rolled it up. I ran my finger over any areas that looked like they were missing ink to spread it out and set it aside.


On my second sheet of cling wrap, I made a point to start with the colors that would blend well (the orange, yellow, red, pink, and finally purple). Then I added the blue and green carefully into any voids so they wouldn't run together as much.


Again I dropped a tiny bit of rubbing alcohol onto the sheet to help the ink spread.


The second candle turned out a bit less muddled and brown. I was a bit worried that they wouldn't look like a set, but I left them alone while I cleaned up my craft mat and hands of ink.


I did a test on the first candle and peeled back part of the plastic. The ink was still quite wet. It created a pretty watercolor-like pattern, but I was hoping for rainbow candles, so I rolled the ink back up and let it set. I had seen a tutorial online that let the plastic sit on a ceramic tile (which I haven't tried yet), so I thought I'd leave it to dry.


After watching an hour long show on Netflix, I came back and checked them. They were a bit less runny, but still wet under the plastic. Alcohol ink generally dries quite quickly (less than a minute), so I wasn't quite sure what to do, but I decided to peel the plastic off since the colors seemed even less defined than when I first peeled the plastic off after inking. I'm not sure I needed the added rubbing alcohol from my first applications. If you're going for soft colors, though, I'd recommend using the extra rubbing alcohol to help spread the ink.


I knew I wanted to add some more colors to my candles--they were looking awfully mauve. So I grabbed another sheet of plastic wrap and dripped ink onto it and placed my candle on the plastic wrap and peeled it away immediately. I used the plastic to add both color and texture to the ink. I'd peel and stick the plastic even without fresh ink on it to move the colors around and create textures.


I repeated this action several times with the same piece of cling wrap--sometimes adding colors, sometimes not. You could probably get colors that come out cleaner and less brown if you changed plastic with each color. After 5-10 minutes of layering color and peeling away plastic, I was starting to get more rainbow colors. They were still a bit muddied, but they came out quite artsy.


It's hard to get a good picture of this technique (I noticed that with the wine bottle project too). They actually come out even prettier in person than they appear in the picture. I still feel like a novice at this particular inking technique, so I look forward to trying it out some more with different colors and surfaces in the future.